|
Edging Installation Guide |
 1. MEASURE AND STAKE OUT SITE
Stake out area and string a line to determine placement. Remove 2" to 3" of sod. Remove roots, large rocks, and loose soil.
 2. PREPARE AND LEVEL BASE
Level soil and add sand if needed.
 3. INSTALL EDGINGS
Place edgings end to end in trench. Be sure to interlock stones.
 4. CUT TO FIT
If you need to cut edgings, use a hammer and chisel, masonry saw or hydraulic splitter (which can be rented). Always wear gloves and safety glasses.
 5. SECURE STONES
Tap down the edgings with a rubber mallet.
 6. REPLACE SOIL
Compact soil so that edgings are held tightly in place.
Tools & Materials Needed:Always wear safty glasses and gloves
Shovel & Metal Rake | 
Stakes, String &
Line Level | 
Tape Measure & Level | | 
Hammer & Tamper | 
PVC Pipe & 2" x 4" | 
Sand | 
Paver-Edge Restraint & Spikes |
|
